BW Technologies CONNEX1, Руководство оператора

Страница: 48 / 72

ConneX1 Operator’s Manual
38
Removal and Disposal of the Rechargeable Battery.
6. Replace the rear shell. Ensure the front and rear shells have a tight, uniform
1 mm (1/16 in.) seal on all sides of the detector.
7. Replace the four machine screws using 3-4 in. lbs of torque. Do not
overtighten the screws.
17. WEEE Directive and Battery Directive
e
Warning: At the end of their working lives, sensors must be disposed of in
an environmentally safe manner, in accordance with local waste management
requirements and environmental legislation. Do NOT incinerate sensors as they
may emit toxic fumes. Failure to comply with the following battery removal and
disposal instructions may result in battery shorting, battery leakage, and/or other
damage. Ensure a qualified technician completes the following procedure.
e
Warning: This detector contains a lithium polymer battery. Dispose of used
lithium cells immediately. Do not disassemble. Do not dispose of in fire. Do not mix
with the solid waste stream. Spent batteries must be disposed of by a qualified
recycler or hazardous materials handler.
17.1 Removal and Disposal of the Rechargeable
Battery.
1. Press and hold to deactivate the detector.
2. Remove the four machine screws from the rear shell.
3. Remove the rear shell.
4. Simultaneously push on the PCB release tab while lifting the PCB up
by the battery.