Burster DIGISTANT 4420-V001, Руководство по эксплуатации

Страница: 43 / 146

Model 4420-V001 DIGISTANT
®
Page 43
Modification of the temperature limits
-
The correction cursor indicates the temperature limit which can be modified.
You can move the correction cursor up with
▲
and down with
▼
.
-
Enter the new temperature values and acknowledge the entry with
UNIT
.
-
Complete your modification of the temperature limits with
ENT .
-
Values can be entered and allocated in the "OUT" and "IN" modes. However, these
values are stored only once and used jointly for both operating modes. In other words,
the entered temperature limits are applicable to "OUT-TC" as well as "IN-TC".
Selection of the unit
-
After pressing the FCT and UNIT keys, set the correction cursor using the
▲
or
▼
key to TC.
-
Using the → or
←
key, select °C, °F or K.
-
Acknowledge with ENT .
Selection of the "RJ:0-20mA" transmission mode
-
If the device is in the "IN" measurement mode, first switch it to the "OUT" transmission
mode by pressing the
IN/
OUT
key.
-
By pressing TC you can then invoke the set transmission mode "TC: X RJ:0-20mA".