manualshive.com logo in svg

Burster DIGISTANT 4420-V001, Руководство по эксплуатации, Страница: 125 / 146

Поделиться
Скачать
Burster DIGISTANT 4420-V001 Скачать руководство пользователя страница 125

Model 4420-V001

DIGISTANT

®

Page 125

Parameters: 

Decimal value

 

Value range: 0 to 32767

REMARKS:

Enquiry form: 

STATus:QUEStionable:ENABle?

 

The contents of the register are supplied as a decimal value 

(0 to 32767).

STATus:QUEStionable[EVENt]?

DESCRIPTION: 

The Questionable Status Event Register is read out.

SYNTAX: STATus:QUEStionable[EVENt]?
Parameters: 

No parameters

REMARKS:

Enquiry form: 

Only enquiry form.

 

The contents of the register are supplied as a decimal value 

(0 to 32767).

STATus:PRESet

DESCRIPTION: 

The Operation Status Enable Register and Questionable 

Status Enable Register are reset.

SYNTAX: STATus:PRESet
Parameters: 

No parameters

 

Value range: 0 to 32767

REMARKS:

Enquiry form: 

No enquiry form

 5.2.13 

SYSTem Subsystem

SYSTem:ERRor?

DESCRIPTION: 

The contents of the error buffer are requested.

SYNTAX: SYSTem:ERRor?
Parameters: 

No parameters

REMARKS:

Enquiry form: 

Only enquiry form

 

The error buffer has a size of 2. One buffer for the first error 

message and one buffer for the "QEU OVERFLOW" message.

 

The error buffer is a "First In First Out" buffer.

 

When an error is read out of the buffer, it is erased. 

 

If no error has occurred, the device responds with „NO ERROR“.

 

An error message consists of:

 

<Error message>,"<Error description>"

Содержание DIGISTANT 4420-V001



















































































































































Отзывы:

Нет отзывов