Burster DIGISTANT 4420-V001 Скачать руководство пользователя страница 13

Страница: 13 / 146

Model 4420-V001

DIGISTANT

Page 13

2. Preparation for use

2.1 Unpacking the device

The device weighs 2.5 kg and is enclosed in appropriate shock-proof packaging.

Unpack the device carefully and check whether the scope of delivery is complete.

The standard scope of delivery includes:

1 universal calibrator DIGISTANT

model 4420-V001

plug-in

power

supply

model

4495-V001

1 3 pin, 3.5 mm jack connector

User’s manual digital on the homepage (

www.burster.com

)

Data Sheet digital on the homepage (

www.burster.com

)

Carefully check the device for any signs of damage. If any damage seems to have occurred during transpora-

tion, inform the supplier within 72 hours.

Store the packaging so that it can be examined by a representative of the manufacturer and/or supplier.

2.2 Supply voltage

The required voltage is supplied by the integrated accumulator or the accompanying power supply unit.

(to be connected to the "Charge" socket).

Only use the 4495-V001 power supply unit included in the scope of delivery!

The DIGISTANT

provides fully normal operation even during re-charging. Continuous operation on the mains

power supply does not harm the NC batteries.

Even if the batteries are completely discharged, the DIGISTANT

can be operated from the power supply unit.

The batteries are gradually charged in this process.

Charging is indicated by an illuminated LED labelled 'Charge' on the front panel. The maximum charging period

is 11 hours.

Once the battery is fully charged, a monitoring function terminates the charging process. The 'Charge' LED

goes off and floating operation is commenced. Self-discharge is thus compensated.

Each time the external power supply is connected, a new charging procedure lasting at least 40 minutes is

commenced. If the battery is already fully charged, it becomes slightly overcharged. This is not harmful, but

should be avoided if possible.

If the internal temperature of the device is < 5 °C or > 40 °C, charging is not possible. In this case, the device

needs to be restarted.

The battery is charged with brief current pulses. This prolongs its service life and reduces the memory effect

(also refer to Page 16 "Notes on correct charging and discharge of the integrated Ni-MH battery").

Operational period per accumulator charge: 7-10 hours (depending in the power load).

Supply voltage for the

type 4495-V001 plug-in power supply: 230 V AC + 6 %, - 10 %, 50 - 60 Hz.

Содержание DIGISTANT 4420-V001



















































































































































Результаты поиска

Содержание DIGISTANT 4420-V001

Отзывы:

Похожие инструкции для DIGISTANT 4420-V001

Бренды по названию

Популярные бренды

Burster DIGISTANT 4420-V001, Руководство по эксплуатации

Результаты поиска

Содержание DIGISTANT 4420-V001

Отзывы:

Похожие инструкции для DIGISTANT 4420-V001

Бренды по названию

Популярные бренды