burmeier Vertica-Homecare, Инструкция по эксплуатации

Страница: 33 / 84

Instruction Manual for Vertica-Homecare Bed
Page 34
4.3.6 Activating Stand-Up Function
1
+
Plug in mains cable + brake castors
(Stand-up function only works with
mains power operation and with
braked castors for safety reasons).
2
Activate marked buttons on the NURSE
handset
[15] at the same time for at
least 3 seconds ):
 NURSE handset [15] is released
 Patient handset [3] and control
panel [13] are locked
Hold down the buttons again for at
least 3 seconds to relock this function.
3
Stand-up function display active by:
 Orange blinking light on NURSE
handset
When the stand-up function is active, the patient handset is
completely locked for safety reasons.
When the stand-up function is active on the NURSE handset [15], the
CPR emergency function can also be adjusted.
The stand-up function remains active until the bed has returned to the
horizontal starting position. See Chapter 4.3.9