burmeier Vertica-Homecare, Инструкция по эксплуатации

Страница: 21 / 84

Instruction Manual for Vertica-Homecare Bed
Page 22
4.2.2 Patient Handset
Motorised adjustments can be activated by the patient or user via the handset
[3]
. For safety reasons the handset is equipped with a locking function.
Depending on the clinical condition of the patient, the user can lock handset
adjustments when deemed necessary by the supervising doctor (see Chapter
4.2.2.2).
- The electric motors operate as long as
the corresponding buttons are pressed.
- Only one button can be pressed at a
time, otherwise all adjustments stop
(safety function).
- All adjustments are possible in both
directions.
- The handset can be hung at any
position on the bed with an elastic
hook.
- The coiled cable provides ample
freedom of motion.
The following basic rule applies to the keys: Raise Lower
4.2.2.1 Adjustment Functions
Auto contour
The backrest and thigh rest can be raised at the same time.
- When raising these, the thigh rest follows the backrest after a two
second delay.
- If the backrest is locked on the control panel, then no
adjustment can be made. If the thigh rest is locked, only the
backrest is adjusted.
- This prevents the patient from sliding towards the foot end of the
bed.
Backrest
The backrest can be raised to approx. 70°.
- Refer also to Chapter 4.4.2: Emergency release of backrest
(CPR)!
Auto contour
Backrest
Mattress base
height
Thigh rest
Reverse-
Trendelenburg
position
Display
Lock
Sleep position