burmeier Vertica-Homecare, Инструкция по эксплуатации

Страница: 12 / 84

Instruction Manual for Vertica-Homecare Bed
Page 13
- This bed may be operated without restrictions and with a permanent
maximum load of 225 kg (= safe operating load, consisting of
occupant and accessories)
Symbol:
- The permitted weight of the patient depends on the total weight of
the accessories attached at the same time (e.g. respirators,
infusions,…)
Symbol:
- The information applicable for your bed is given on a sticker with the
above symbol which is located on the chassis of the bed.
- Example:
Weight of accessories
(incl. mattress) Max. permitted
weight of patient
15 kg 210 kg
40 kg 185 kg
- This bed is designed for re-use. When re-using the bed, observe the following
requirements:
- Cleaning and Disinfection (see Chapter 5)
- Maintenance / Repeat Inspections (see Chapter 6).
- This bed may not be used in explosive environments caused, for example, by
cleaning agents or anaesthetics.
- This bed may not be used in combination with high frequency surgical
equipment.
- Before using the safety sides, assess and take into consideration the clinical
condition and particular physical build of the patient:
- For example, if the patient is extremely confused or very restless, avoid
using safety sides as much as possible and make use of alternative
safety measures such as posey belts, restraint sheets, etc.
- In the case of particularly small, slightly built patients it may be
necessary to use an additional form of protection to reduce the size of
the safety side gaps. In these cases, use protective covers (accessory),
posey belts, etc.
2.3.3 Contraindications
 This bed is only suitable for patients who do not fall
below the following minimum body
measurements/weight:
o
Height: 146 cm,
o
Weight: 40 kg
o
Body Mass Index
1
“BMI“: 17.
 Owing to the smaller limbs of occupants with a body size/weight that is less
than this, there is an increased risk of entrapment between the open spaces of
the safety sides when safety side systems are used.
1
Calculation of BMI =
𝑊𝑒𝑖𝑔ℎ𝑡 𝑜𝑓 𝑝𝑎𝑡𝑖𝑒𝑛𝑡 [𝑘𝑔]
𝐻𝑒𝑖𝑔ℎ𝑡 𝑜𝑓 𝑝𝑎𝑡𝑖𝑒𝑛𝑡 [𝑚]
2
;
example: a)
41 𝑘𝑔
1.5𝑚 ×1.5𝑚
= 18.2

OK!; b)
35 𝑘𝑔
1.5𝑚 ×1.5𝑚
= 15.6

Not ok
Sticker on
bed chassis