burmeier Vertica-Homecare, Инструкция по эксплуатации

Страница: 25 / 84

Instruction Manual for Vertica-Homecare Bed
Page 26
4.2.3 NURSE Handset (Stand-Up Function)
The NURSE handset is exclusively for setting various therapeutic
special bed positions by the care staff or those carers who have
been trained in how to use the “stand-up function”.
The general operation takes place the same as described earlier
for the patient handset.
The NURSE handset is generally locked when in standard
operation and must be first released when needed.
Further details on the stand-up function: See Chapter Fehler!
Verweisquelle konnte nicht gefunden werden.
4.2.4 Battery Pack (Rechargeable Batteries)
In an emergency, rechargeable batteries are used to operate the electrical
actuator system independently of the mains supply. This guarantees that all
motorised adjustments can be carried out even during a power failure.
Emergency operation
- When the bed is occupied by a patient of normal weight (approx. 80 kg),
adjustments can be made for approx. 6 to 10 minutes if the battery is new and
fully charged.
- Under emergency conditions, if the remaining battery capacity is 30%
depleted, a signal tone will sound as an alert during the adjustment.
If the battery charge is <10%, all adjustment functions are stopped in
order to prevent the batteries from discharging their entire charge.
In this case, take the following action to optimise the battery life:
- Plug the bed into the mains power supply as soon as possible to
recharge the battery
- Avoid attempting repeated motorised adjustments that would
discharge the battery even more
Charging the Batteries (Charging Time)
- The batteries are fully charged automatically when the bed has been
connected to the mains supply for at least 8-10 hours. See Chapters 4.2.5 and
4.2.6.
- It is impossible to overcharge the battery.
- During the charging process, the bed can be adjusted in the normal way.
-
The batteries have a limited service life. In normal use, this service life is up to five years.
Batteries need to be replaced when operation cycles become very short. For safety
reasons, at least one more height adjustment (up + down) should always be possible,
otherwise, the batteries must be replaced