Instruction Manual for Vertica-Homecare Bed
Page
39
4.4.2
Emergency Release of the Backrest (CPR)
This procedure can be carried out from either of the long sides of the bed
1.
Lower any safety sides that are raised, at least on
the side chosen to perform the procedure, to
make it easier to reach the bed
2.
With one hand, grasp the grab handle [
4
] on the
backrest.
3.
With the other hand, pull the red operating lever
[
12
], which is located under the mattress base
near the backrest, upwards and guide the
backrest down to the desired position using the
grab handle
[4]
.
The backrest is not held in position until the
operating lever [
12
] is released.
As soon as the drive system is connected to the mains supply again, the backrest
can be adjusted using the handset or control panel.
The red operating lever [
12
] for lowering a backrest with weight
resting on it in an emergency is only for emergency situations and
must not be continually used for mechanical adjustment!
If the backrest has no weight resting on it and is steeply inclined, the
backrest must also be forcefully pushed down by hand in order to
overcome the attenuation built-in to prevent it from lowering too
quickly.
After actuating the operating lever, a heavy patient may cause the
slightly raised backrest to drop down quickly!
Always grip the backrest by the grab handle (
4
) with one hand so as
to “control” the adjustment.
12
4
Содержание Vertica-Homecare
Страница 1: ...Instruction Manual Care bed with stand up function Vertica Homecare Date 2018 05 25 241335 v3...
Страница 81: ...Instruction Manual for Vertica Homecare Bed Page 82 Notes...
Страница 82: ...Instruction Manual for Vertica Homecare Bed Page 83 Notes...
Страница 83: ...Instruction Manual for Vertica Homecare Bed Page 84...
