Burkert 8745 MFC Ethernet, Руководство по эксплуатации

Страница: 9 / 70

9
Basic safety information
Type 8745 Ethernet, 8745 Analogue
3 BAsic sAfETy infOrmATiOn
This safety information does not take into account any contin -
gencies or occurrences that may arise during installation, use
and maintenance of the product.
The operating company is responsible for the respect of the local
safety regulations including for the personnel safety.
risk of injury that is due to pressure in the installation or in
the product.
▶
Before working on the installation or product, cut the pres -
sure. Vent and drain the pipes.
risk of injury from electric shocks.
▶
Before working on the installation or product, switch off the
power supply. Make sure that nobody can switch the power
supply on.
▶
Observe all applicable accident protection and all applicable
safety regulations for electrical equipment.
Burn hazard and fire hazard that are due to hot surface of the
product.
▶
Do not touch the hot surface with bare hands.
▶
Wear safety gloves to touch the product.
▶
Keep the product away from any highly flammable materials
or fluids.
Risk of injury that is due to escape of the fluid.
▶
Observe all applicable accident protection and all applicable
safety regulations relating to the operating fluid used.
Various dangerous situations.
To avoid personal injury, obey the following instructions:
▶
Do not operate the product without its mesh filter.
▶
Only operate the product in the installation position given on
the calibration plate.
▶
Make sure that the operating pressure of the MFM is not
higher than the maximum calibration pressure that is given
on the calibration plate.
▶
Make sure that the operating pressure of the MFC is not
higher than the tight sealing pressure of the control valve.
▶
Only use the product for the fluid specified as the operating
fluid in the calibration protocol.
▶
Only use agents that are stable with the product materials for
cleaning and decontamination
Find the compatibility chart on our homepage:
country.burkert.com
In the event of any ambiguity please contact your local sales
office.
▶
Do not make any modifications to the product and do not
subject the product to mechanical stress.
▶
Protect the installation and the product from accidental
actuation.
▶
Only trained personnel may perform installation work and
maintenance work.
▶
After an interruption in the electrical supply or in the fluid
supply, ensure a controlled restart of the process.
▶
Observe best industry practice.
English