Burkert 8745 MFC Ethernet, Руководство по эксплуатации

Страница: 37 / 70

37
Fluid installation
Type 8745 Ethernet, 8745 Analogue
→
Observe the installation position that is given on the cali -
bration plate or in the calibration protocol.
→
Slide the nut [ a ] and then the ferrule onto the pipe. See Fig.
18.
a
B
c
ferrule
Fig. 18: Nut and ferrule on the pipe
→
Place the seal [C] on the product fluid-connection.
→ Screw the compression-fitting body [B] in the fluid con -
nection. Tighten to a torque of 25...28 N·m, that is
18.44...20.65 lbf·ft. See Fig. 19.
c
B
Fig. 19: Screw on the compression-fitting body
→
Insert the pipe in the compression-fitting body. Tighten the
nut [ a ] by hand. See Fig. 20 .
a
Fig. 20: Nut screwed by hand
→
Tighten the nut with an open-end spanner to a torque of
25...28 N·m, that is 18.44...20.65 lbf·ft. See Fig. 21.
Fig. 21: Nut tightened with an open-end spanner
→ Do the fluid connection on the other side of the product in the
same way.
English