Burkert 8745 MFC Ethernet, Руководство по эксплуатации

Страница: 48 / 70

48
Setting and Operation
Type 8745 Ethernet, 8745 Analogue
If the inserted memory card is empty, then the product loads
its own data on the memory card. Possible problems related to
the memory card are given in chpt. 12.3.4 and chpt. 12.3.5.
NOTICE
If the memory card is defective or lost, then buy a new memory
card from your Bürkert sales office.
5. If the product is an MFC, and the operating fluid is not the
calibration fluid or the pressure conditions have changed,
then run the Autotune function. See chpt. 10.8 Optimise the
closed-loop control parameters (MFC) .
The product operates normally .
10 sETTing And OpErATiOn
10.1 Safety instructions
DANGER
risk of injury that is due to pressure in the installation or in
the product.
▶
Before working on the installation or product, cut the pres -
sure. Vent and drain the pipes.
risk of injury from electric shocks.
▶
Before working on the installation or product, switch off the
power supply. Make sure that nobody can switch the power
supply on.
▶
Observe all applicable accident protection and all applicable
safety regulations for electrical equipment.
Burn hazard and fire hazard that are due to hot surface of the
product.
▶
Do not touch the hot surface with bare hands.
▶
Wear safety gloves to touch the product.
▶
Keep the product away from any highly flammable materials
or fluids.
Risk of injury that is due to escape of the fluid.
▶
Observe all applicable accident protection and all applicable
safety regulations relating to the operating fluid used.
English