Burkert 8745 MFC Ethernet, Руководство по эксплуатации

Страница: 51 / 70

51
Setting and Operation
Type 8745 Ethernet, 8745 Analogue
→
Insert the micro-USB connector into the büS-interface for the
Bürkert Communicator software. The location of the büS-in -
terface on the product is given in chpt. 5.1.
→ Wait until the Windows pilot of the büS stick has been com -
pletely installed on the PC.
→ Start the Bürkert Communicator software.
→ Click on in the Bürkert Communicator software to esta -
blish the communication between the Bürkert Communicator
software and the product. A window opens.
→
Select büs stick .
→ Choose the port Bürkert usB büs stick , click on finish and
wait until the product symbol appears in the list of devices.
→
In the list of devices, click on the symbol related to the
product. The menu structure for the product is displayed.
10.5 User-defined adjustment
At delivery the product is calibrated by the manufacturer.
With the Bürkert Communicator software, you can define an
adjustment procedure with up to 32 calibration points.
The user-defined adjustment procedure is described in the prod -
uct-specific Help of the Bürkert Communicator software.
→ To connect the product to the Bürkert Communicator
software, refer to chpt. 10.4 .
10.6 Operating modes of an MFC
When energizing the product for the first time, the product enters a
short initialisation phase and then switches to the normal operating
mode. The normal operating mode is described in chpt. 10.7 .
The possible operating modes are described in Tab. 34.
Tab. 34: Names of the operating modes of an MFC in the Bürkert
Communicator software
Operating mode description
Product variant Ethernet:
automatic
Refer to chpt. 10.7
Product variant Analogue:
analog set-point value
Refer to chpt. 10.7
manual set-point value Refer to chpt. 10.9
stored set-point value
Refer to chpt. 10.9
Open-loop control mode
Refer to chpt. 10.9
analyze system
Refer to chpt. 10.9
→
To change the operating mode, change the source for the set-
point values. Refer to chpt. 10.9 .
The operating mode is kept after a product restart, except when
the product performs the function analyze system .
English