Page 24
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
29877 080301
SET PREINFUSION
This function allows the operator to set an initial
soaking of the grounds and a delay time, before the
complete brew cycle starts.
Procedure for Modifying preinfusion times:
Range: On time
- off to 4 minutes
Off time
- off to 4 minutes for all three batch
sizes
NOTE:
If the brewer is already in the
SET PREINFUSION
screen, it is not necessary to follow steps 1 through 9
in this section, but proceed directly to step 10.
1. Press and hold the ® pad until the display reads
SET NEW RECIPES.
Release the ® pad. Press the
® until the display reads
REVIEW RECIPES
.
2. Press
YES
to proceed. The display should now
read
NO-NAME LEFT,
along with
MODIFY, SHOW
and
NEXT.
3. Press and release
NEXT
to advance to the desired
coffee name to be modified.
4. Press and release
MODIFY.
The display should
read
BREW OZ.
5. Press and release
DONE
. The display should read
3 BATCHES DONE?
.
6. Press and release
YES
. The display should now
read
% BYPASS.
7. Press and release
DONE
. The display should read
3 BATCHES DONE?
.
8. Press and release
YES.
The display should now
read
SET PULSE BREW.
9. Press and release
NO.
The display should now
read
SET PREINFUSION.
10. Press
YES
to proceed. The display should now
read
ON TIME
and a batch light will be blinking.
11. Using
(-)
and
(+)
, set the amount of time the brew
water will initially
presoak
the grounds for that
particular batch size.
12. When finished, press another batch size and re-
peat until all three batch sizes are set.
13. When finished, press
DONE.
The display should
now read
OFF TIME
and a batch light will be
blinking.
14. Using
(-)
and
(+)
, set the amount of time the brew
cycle will delay (after the presoak cycle shuts off)
before resuming brewing.
15. When finished, press another batch size and re-
peat until all three batch sizes are set.
16. When finished, press
DONE.
The display will show
the
ON
and
OFF TIMES
that were entered for each
particular batch size.
17. After a 5 second delay, the display should read
3
BATCHES DONE?.
If the three batches are not
complete, press
NO
in order to return to
SET
PREINFUSION
, and repeat steps 10 through 14.
18. If the three batches are done, press
YES
. This will
advance to the next function,
SET DRIP TIME.
Another alternative is to press and release either of
the
pads located on the front panel of the
brewer to exit
SET PREINFUSION
and return to the
MAIN SCREEN
.
P2296
