Page 11
29877 121302
PROGRAMMING THE BREWER (cont.)
PROGRAM FUNCTIONS - LEVEL 2
There are three methods of programming the
various brewing parameters of the Dual
®
SH with
Smart Funnel
®
Brewer.
METHOD 1:
Using a Smart Funnel
®
and a G9-2T DBC Grinder:
Certain coffee
NAMES
are stored in the G9-2T
DBC's memory. When a particular name of coffee is
ground into the Smart Funnel
®
, that name and the
batch size selected are transferred from the grinder to
the programming
chip
located in the funnel's handle.
The funnel is then inserted into the brewer's left side
funnel rails. The sensor coil on the brewer reads the
information contained in the handle. This then allows
the operator to set the
BREW VOLUMES, BYPASS
PERCENTAGES, PULSE BREW TIMES, PREINFUSION
TIMES
and
DRIP-OUT TIMES
for that particular coffee
NAME
. Each coffee
NAME
can be set individually to
provide optimum brewing quality.
METHOD 2:
Using a RECIPE CARD to enter all of the brew
settings at one time:
If using a coffee name not in the G9-2T DBC's
memory, the customer can obtain a
RECIPE CARD
from the factory with all the information needed to set
up that particular coffee flavor. This includes the
COFFEE NAME
,
BREW VOLUMES, BYPASS PER-
CENTAGES, PULSE BREW TIMES, PREINFUSION
TIMES,
and
DRIP-OUT TIMES.
METHOD 3:
Not using a Smart Funnel
®
and/or a G9-2T DBC
Grinder:
This allows the operator to enter
ONE
set of
brewing parameters for each side, in the event a Smart
Funnel
®
and/or a G9-2T DBC is not used with the Dual
®
SH Brewer. This is referred to as a
NO NAME
coffee
flavor. If the brewer does not read the information in
the funnel's handle, it automatically selects the
NO
NAME
brewing parameters set up prior to brewing.
This includes the
BREW VOLUMES, BYPASS PER-
CENTAGES, PULSE BREW TIMES, PREINFUSION
TIMES
and
DRIP-OUT TIMES
for the three batch sizes.
RECIPES
This diagram allows for the creating, modifying, or
viewing of recipes in the brewer.
P2369
