Page 23
29877 080301
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
Setting Pulse Brew - ENTER TIMES:
NOTE:
No water should flow from the brewer during
this set-up process.
1. This display should read
1ST ON TIME X:XX.
Choose the batch size to be set by pressing the
pad next to the indicator light on the left brew side.
The batch size indicator selected will be flashing.
2. Adjust the
1ST ON TIME
using
(-)
and
(+).
When
finished, press
DONE. (a)
3. The display will now read
OFF TIME X:XX.
Adjust
the
OFF TIME
using
(-)
and
(+).
When finished,
press
DONE.(b)
4. The display will now read
LAST ON TIME X:XX.
Adjust the
LAST ON TIME
using
(-)
and
(+).
When
finished, press
DONE.(c)
5. The display will show the three times just entered
for that batch size. After a 5 second delay, the dis-
play will read
3 BATCHES DONE?(d and e)
P2411
6. If other batch sizes need to be modified, press
NO.
The display will then read
SET BY EXAMPLE.
7. In that screen, press
NO
. The display should now
read
ENTER TIMES.
8. Press
YES
in this screen, then press a different
batch size pad and repeat steps 2 through 4. Re-
peat until all the desired batch sizes are set for the
left side.
9. When finished press
YES
in
3 BATCHES DONE?.
The display will then read
SET PREINFUSION.
Another alternative is to press and release either
of the
pads located on the front panel of the
brewer to exit
SET PULSE BREW
and return to
the
MAIN SCREEN
.
NOTE:
Pressing ® before reaching the final setting
screen exits the setup and retains the old values.
