Bull NovaScale R410 E1, Руководство пользователя

Страница: 287 / 319

User Guide
287
www.bull.com
Memory Configuration Submenu
SATA Controller Configuration Submenu
Table 18: Memory Configuration Submenu
Feature Choices or
Display Only Description Your Setting
Total Memory Display only Displays the amount of memory
available in the system in the
form of installed FBDIMMs, in
units of MB or GB.
Effective Memory Display only Displays the amount of memory
available to the operating
system in MB or GB.
The Effective Memory is the
difference between the Total
Physical Memory and the sum
of all the memory reserved for
internal usage. This difference
also includes the sum of all the
DIMMs that failed the Memory
Test during POST.
Current Configuration Display only Displays one of the following:
-
Single-channel Mode :
System memory is functioning
in a special, reduced efficiency
mode.
- Dual-channel Mode
Current Memory Speed Display only Displays the current memory
speed.
DIMM information
DIMM_A1
DIMM_A2
DIMM_B1
DIMM_B2
Display only Displays the state of each
DIMM socket present on the
board. Each DIMM socket field
reflects one of the following
possible states:
- Size info: there is a DIMM
installed on this slot and the
size information is displayed.
- Not installed : there is no
DIMM installed on this slot.
Memory Correction Non-ECC
ECC
Select either ECC or Non-ECC
depending on the installed
memory type.
Table 19: IDE Controller Submenu
Feature Choices or
Display Only Description Your Setting
Onboard SATA Controller Enabled
Disabled
When enabled, the SATA
contoller can be configured in
IDE, RAID, or AHCI Mode.
RAID and AHCI modes are
mutually exclusive.
Configure SATA as IDE
RAID
AHCI
Configures SATA as RAID, IDE
or AHCI.