Buhler FK370, Руководство оператора и каталог запасных частей

Страница: 9 / 60

16” Backsaver Auger
6
TRANSPORT SAFETY – cont’d.
Take extreme caution in maneuvering on or around tight corners so as not to catch the
end of the auger on trees, buildings, power lines, etc.
The equipment should never be towed without the safety chain securely attached to the
auger and the towing vehicle.
When moving the auger on the road, always use a red flag, or if absolutely necessary to
move at night, accessory lights for adequate warning to operators of other vehicles.
Always travel at a safe speed.
Inflate transport tires to recommended pressure.
SERVICE AND MAINTENANCE SAFETY
Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before
servicing, adjusting, repairing, or unplugging.
Support the equipment with blocks or safety stands before working beneath it.
Follow good shop practices including
-
Keep service area clean and dry
- Be sure electrical outlets and tools are properly grounded
- Use adequate light for the job
Use only tools, jacks, and hoists of sufficient capacity for the job.
Replace and secure all shields removed during servicing before operating.
Use heavy leather gloves to handle sharp objects.
Check hydraulics regularly for leaks. Use cardboard to look for leaks, and use hand and
eye protection.
Relieve pressure on hydraulic system before repairing or adjusting.
Failure to follow proper procedures when mounting a tire on a wheel or rim can produce
an explosion, which may result in serious injury or death.