Buhler FK370 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 60

background image

16” Backsaver Auger

STORAGE SAFETY

Store the unit in an area away from human activity.

Do not permit children to play on or around the stored machine.

Support the frame on stands and blocks to provide a secure base.

When storing an auger, park it on level ground so that the bottom end will never be over
its center of gravity.

Block the wheels of the auger so that the auger will not move and tear the jack from its
mount.

SAFETY SIGNS

The following illustration shows the approximate location and detail of safety signs.
Keep all safety signs clean and legible and replace any that are damaged or missing.
When original parts are replaced, any safety signs affixed to those parts should be
replaced as well. Replacement safety signs are available from your local dealer.

INSTALLATION

To install safety signs, ensure the installation area is clean and dry. Decide on the exact
position before you remove the backing paper. Remove the smallest portion of the split
backing paper and align over the specified area. Carefully press in place. Slowly peel
back the remaining paper and smooth the remaining portion in place. Small air pockets
can be pierced with a pin and smoothed out.

16” AUGER SAFETY SIGNS

7

«
...
8
9
10
11
12
...
»

Содержание FK370





























































Отзывы:

Нет отзывов

Похожие инструкции для FK370

Бренд: ZOLL Страницы: 84

Бренд: Kaivac Страницы: 29

Бренд: MacDon Страницы: 65

Бренд: Quincy lab Страницы: 4

TRAKTOR KONTROL S4

Бренд: Native Instruments Страницы: 86

Бренд: Native Instruments Страницы: 245

Бренд: Valmar Страницы: 78

Бренд: Valhalla Scientific Страницы: 64

Бренд: Mako Страницы: 17

BOS R254K-UUI-LH10-S4

Бренд: Balluff Страницы: 12

Бренд: Yamaha Страницы: 48

Бренд: Yamaha Страницы: 85

Бренд: Yamaha Страницы: 43

Бренд: Yamaha Страницы: 200

Бренд: Ultrasonic Страницы: 33

Бренд: RAMVAC Страницы: 53

Бренд: ABB Страницы: 112

Бренд: Landoll Страницы: 144

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды