Buell Ulysses 2006, Руководство по обслуживанию, Страница: 183 / 638

2006 Buell Ulysses: Chassis 2-59
HOME
Swingarm
1. Remove seat. See 2.45 SEAT .
1 1
WARNING
1
WARNING
To prevent accidental vehicle start-up, which could
cause death or serious injury, disconnect battery cables
(negative (-) cable first) before proceeding. (00307a)
2. Disconnect battery by unthreading fasteners removing
negative cable (black) from battery first. See
1.4 BAT-
TERY MAINTENANCE .
3. See Figure 2-86. Remove oil drain plug (8) and drain oil
from swingarm. See Drain Oil in 1.5 ENGINE LUBRICA-
TION SYSTEM .
4. Remove rear fender. See 2.36 FENDERS.
5. See Figure 2-85. Remove lower belt guard (4).
6. Remove rear wheel. See 2.6 REAR WHEEL .
7. Remove chin fairing and sprocket cover. See 2.38 CHIN
FAIRING and 2.35 SPROCKET COVER .
8. Remove p-clamp fastener and washer from swingarm.
9. Remove rear inner fender. See 2.36 FENDERS .
10. Disconnect the three oil lines from swingarm fittings. See
3.10 OIL LINE FITTINGS.
11. With vehicle supported remove lower shock absorber
mounting fastener and spacer from shock absorber and
swingarm.
12. See Figure 2-86. Loosen pivot shaft pinch fastener (7).
13. Remove pivot shaft (9) with the 7/8 in. hex tool from the
tool kit.
14. Remove swingarm from vehicle.
Figure 2-86. Swingarm Assembly
b1216x1x
1. Swingarm
2. Dipstick
3. Swingarm bushings
4. Swingarm spacer
5. Swingarm bearing (2)
6. Engine crankcase
7. Pivot shaft pinch fastener w/nut
8. Oil drain plug
9. Pivot shaft
10. Brace fasteners (4)
11. Brace
12. Rear axle pinch fastener
13. Oil line fitting
2
4
5
12
11
5
1
3
6
7
8
10
10
9
13