![background image](http://html1.mh-extra.com/html/bticino/terraneo-pabx-18d/terraneo-pabx-18d_installer-instructions-for-use_2825136082.webp)
PABX 18D
82
9 INSTALLATION
9.7 SYSTEM TYPE APPROVAL
After completing the installation and connection operations, perform the tests described below carefully,
to check that the telephone lines and extensions are wired correctly and that the exchange is working
properly.
1.
Connect the telephones and the telephone line.
2.
With the system switched off lift the receiver of telephone 401; you should hear the telephone
exchange dial tone.
This checks emergency operation in which telephone 401 is directly connected on telephone line.
3.
Switch on. The green LED should come on immediately and then after a few seconds the red LED
should shine steadily. If the red LED flashes, the exchange is not switched on correctly; make sure
that the connector of accessory item 335919 has not been put into the IOIOI port.
4.
Lift the receiver of telephone 401 and press R; you should hear a continuous tone.
5.
Dial 402: this makes an internal call to extension 402; answer from telephone 2 and check the
sound connection between the two telephones.
6.
Repeat the same operation for all the telephones connected to the exchange.
7.
Soulever le combiné du téléphone n
°
401; on doit entendre la tonalité libre du standard
téléphonique.
8.
Lift the receiver of telephone 401; you should hear the telephone exchange dial tone.
9.
Check the door entry services; open door lock, switch on staircase light and self-switching on of
the outdoor station.
Содержание Terraneo PABX 18D
