![background image](http://html1.mh-extra.com/html/bticino/terraneo-pabx-18d/terraneo-pabx-18d_installer-instructions-for-use_2825136040.webp)
PABX 18D
40
8 CALL LOCK MANAGEMENT
This programming can define for each telephone which telephone prefixes cannot be called.
The locked telephones must be programmed individually.
In basic programming conditions all prefixes are unlocked.
There are two types of lock:
1. Lock prefix 00
2. Lock programmed prefixes
The locks are valid for all the programmed telephone carriers as described below.
The type of lock activated can be defined for each telephone.
Warning:
lock 1 excludes lock 2
To be able to make a telephone call to a number which begins with a locked prefix the prefixes must be
temporarily unlocked (see “Temporary unlock” section in the “User Instruction” manual).
The emergency numbers (112 carabinieri, 113 emergency, etc.) are not locked and can thus be called
even if the active prefixes are locked.
8.1 LOCK PREFIX 00
The procedure to lock prefix 00 is the following:
1.
Lift the receiver.
2.
Press the
key
3.
Dial the sequence 961 XXXX (where XXXX corresponds to the programming password) 01 (Extension
number from 01 to 08) R to lock prefix 00 on telephone 1.
The procedure to unlock prefix 00 on telephone 1 is the following:
1.
Dial the sequence 960 XXXX (where XXXX corresponds to the programming password) 01 (Extension
number from 01 to 08) R.
2.
After receiving the confirmation tone, hang up.
To individually lock the telephone carriers for international calls do not use this lock (prefix 00) but the
programmed carriers lock; see section below and examples.
8.2 LOCK PROGRAMMED PREFIXES
The “lock programmed prefixes” operation locks a series of prefixes which has previously been defined
and entered in the exchange.
The lock programmed prefixes procedure is the following:
1.
Lift the receiver.
2. Press the
key
3.
Dial the sequence 951 XXXX (where XXXX corresponds to the programming password) 01 (Extension
number from 01 to 08) R to lock programmed prefixes 00 on telephone 1.
The procedure to unlock the programmed prefixes on telephone 1 is the following:
1.
Dial the sequence 950 XXXX (where XXXX corresponds to the programming password) 01 (Extension
number from 01 to 08) R to unlock the programmed prefixes on telephone 1.
2.
After receiving the confirmation tone, hang up.
Содержание Terraneo PABX 18D
