![background image](http://html1.mh-extra.com/html/bticino/terraneo-pabx-18d/terraneo-pabx-18d_installer-instructions-for-use_2825136011.webp)
Terraneo
11
3
PROGRAMMING
Programming can be performed in two different ways:
Manually typing codes on the keypads of the touch-tone telephones.
The programming is not possible with pulse-dial telephones.
By means of a personal computer, using the dedicated software which can be downloaded free of
charge from the www.bticino.it Internet site.
3.1 BASIC CONFIGURATION
When switching on for the first time, the exchange is programmed with the following basic configuration:
Italian telephone network
active touch-tone telephone line
as a base the programming, remote activation and temporary unlock password is: 1 2 3 4
all the extensions are programmed as extension telephones: specific programming is required for the
connection of FAX, answering machines or modem
the door entry call signal lasts for 30 seconds
the staircase light is switched on (with
or R8) by means of the exchange relay in monostable
mode for 2 seconds. The relay can be used for other services instead of switching on the staircase
light by means of specific programming.
3.2 PROGRAMMING FUNCTIONS BY PERSONAL COMPUTER
All the functions can be programmed by Personal Computer; for this type of programming the exchange
must be connected with a PC by means of interface item 335919. The interface is made up of a 1.5 m
multi-cable with a connector to be put into the exchange IOIOI port and another connector to be put into
the Personal Computer (COM1 – COM2).
Then use the “TIPBX” software which can be downloaded free of charge from the www.bticino.it Internet
site in the technical software section.
For systems including the Video Distributor item 335918 th]ƒ[oftware must be version 3.1 or later.
There is no need to enter the password when programming by computer. This allows reprogramming the
exchange even if the password has been forgotten.
Warning:
When the programming is complete take the cable out of the exchange
IOIOI
port.
Never leave the cable in the
IOIOI
port when switching the exchange on. If you do the red LED will
flash
.
Содержание Terraneo PABX 18D
