![background image](http://html1.mh-extra.com/html/bticino/terraneo-pabx-18d/terraneo-pabx-18d_installer-instructions-for-use_2825136012.webp)
PABX 18D
12
3.3 ACCESS TO PROGRAMMING THROUGH EXTENSIONS
Lift the receiver
Press ke
R
, you will hear the start-dialling tone.
Type:
Dial the password (e.g. base )
- If the password is correct you will hear a start-dialling tone
- If the password is not correct you will hear a time-out tone. In this case hang up and repeat the procedure
described above.
After the start-dialling tone proceed with the programming.
The programming can be performed from any extension.
#
#
1
2
3
4
3.4 REINITIALISATION COMMANDS (RESET)
To reset the factory values for some or whole groups of parameters use the following commands after
performing the access programming procedure:
general reset:
wait for the confirmation tone.
Warning: The command modifies the Password returning it to the initial value 1 2 3 4 and cancels
the short number table, the programmed locks tables and the carrier table.
For the other setting see the description of the basic configuration.
House-automatic scenario 1 is thus reset.
Telephone line parameters:
reinitialisation of the telephone line parameters (length of R key or
flash recognition time,…);
fax/modem:
Cancelling Fax/Modem and answering machine programming.
3
PROGRAMMING
#
9 9 9 9 9
#
1 9 9 9 9
#
3 9 9 9 9
Содержание Terraneo PABX 18D
