391695 / 391696 / 391715 / 391716 / 391717
58
4.9 Pattern Setup
PATTERN SETUP
------------------------
PATTERN NO. 1
UNDEFINED
CLR PATTERN CANCEL
RUN PATTERN
<EDIT PATTERN>
BACK
EXIT
Pattern Number
[1~4 ]
Selects a Pattern number to edit. If the selected pattern
number is not defined, "UNDEFINED" will be displayed under
the selected pattern number.
Clear Pattern
[CANCEL/OK]
Deletes the data of the selected pattern.
Runs the Pattern for the test purposes to check if it works
properly.
Run Pattern
Edits the selected pattern.
Edit Pattern
Pattern Edit
EDIT PATTERN 1
------------------------
MOVE TO START POSITION
[NEAR:START /FAR:CANCEL]
EDIT PATTERN 1
[NEAR:SAVE /FAR:DELETE]
0/0/x1/N
1) With the Joystick of your controller, move the camera to the start position with an appropriate zoom magnafication. To
start the pattern recording, press
NEAR
key. To exit, press
FAR
key.
2) Move camera with joystick of controller or run preset function to memorize the path (mostly curve path) in the selected
pattern. The movement by Joystick and preset movement will be memorized in a pattern. After a pattern is programmed,
the remaining storage is displayed in progress bar on the screen.
3) To save the data and exit, press
NEA
R key. To cancel saving the data and delete the data, press
FAR
key.