background image

                    Available from A1 Security Cameras 

    www.a1securitycameras.com email: [email protected]

BN481E82

 

Eight-channel Network Recording Kit

 

❶ 

UNPACKING 

Your system includes the following: 

❷ 

CONNECTIONS 

Camera ConnecƟons 

Cameras 

•  8 x Netowrk Dome Cameras 
•  8 x Hardware Packs, with: 

MounƟng Template, 
Expansion Bolts (3), 
Self-tapping Screws (3), Hex Wrench, 
Startup Guide, and SoŌware CD 

Network Video Recorder 

•  1 x 8-channel NVR, with: 

Pre-installed 2 TB HDD, 
AC Power Supply, 
Ethernet Cable, Mouse, 

Video Output 

Ethernet, RJ-45 

Hard Drive SATA Cable, HD Hardware, 

Power Input 

12 VDC or PoE (IEEE 803af) 

Startup Guide, and SoŌware CD 

DIMENSIONS 

INSTALLATION 

❹ 

Camera and NVR 

❺ 

Mount and Make ConnecƟons 

375.0 mm 

(14.80 in.) 

53.0 mm 

(2.10 in.) 

•  Ensure the wall or ceiling can support 3x the weight of the 

camera. 

327.50 mm 

(12.90 in.) 

•  If you are connecƟng the IP cameras to the PoE ports of the 

NVR, DO NOT connect a 12VDC power supply to the cam-
era. Power will be supplied to the camera via PoE. Proceed 
directly to the next step. 

CONNECTIONS 

❸ 

NVR ConnecƟons 

1  100 to 240 VAC Power IN 

Audio IN/OUT 

2  On/Off BuƩon 

VGA OUT 

3  PoE, RJ45 (x8) 

Alarm I/O 

4  Network Switch, RJ45 

HDMI OUT 

5  USB Port 

10 

Ground 

INSTALLATION 

❻ 

Waterproof the Network Connector 

•  Place the wide side of the rubber ring onto the end of the 

network cable extending out from the camera. 

•  Thread the cable through the Fixing Rubber Ring and the 

Waterproof Locking Cover. 

•  AƩach the male Ethernet connector to the network cable 

coming from the camera. 

•  Connect the other end of the waterproof connector to the 

network port and rotate it clockwise to lock the network 
port and waterproof connector firmly. 

•  Slide the Waterproof Locking Cover over the main body of 

waterproof connector and rotate it clockwise to seal the 
connecƟ on 

Reviews: