![background image](http://html1.mh-extra.com/html/bticino/391695/391695_instruction-manual_2825490042.webp)
391695 / 391696 / 391715 / 391716 / 391717
42
4.3 Display setup
DISPLAY SETUP
------------------------
CAMERA ID ON
PTZ INFORMATION AUTO
ACTION TITLE AUTO
PRESET LABEL AUTO
ALARM I/O AUTO
<SET NORTH DIRECTION>
<PRIVACY ZONE>
BACK
EXIT
Display setup allows you to program how labels are displayed on the monitor. In case of AUTO, the
labels are displayed on the monitor when there are any changes in parameters.
Camera ID
[ON/OFF]
Displays the selected Camera ID (Address).
PTZ Information
[ON/OFF/AUTO]
Displays the amount of pan from zero degree vertical, the amount of
tilt from zero degree horizontal and current compass direction. Also
identifies the amount of the zoom magnification.
Action Title
[ON/OFF/AUTO]
Identfies Actions.
"SET PRESET xxx"
"PRESET xxx"
"PATTERN x"
"SWG/PRESET xxx"
"UNDEFINED"
Preset Label
[ON/OFF/AUTO]
Displays the preset labels when the camera arrives at presets.
Alarm I/O
[ON/OFF/AUTO]
Displays the activated alarms. This information shows the current
state of Alarm Inputs and Relay Outputs. If an Input point is
ON
state,
it will show a number corresponding to each point. If an Input point
is
OFF
state,
'-'
will be displayed.
Example: The point 2 & 3 of inputs are
ON
and Output is
ON
,
OSD will
show as below.
I:-23 O:1