391695 / 391696 / 391715 / 391716 / 391717
28
2.7 Installation with Wall Mount Bracket (391715/391716/391717 Models)
①
Make a hole whose diameter is 30~40mm on the
mounting surface to pass the wire(s) and cable(s)
through the mounting surface. (In case of the wiring
and cabling through the mounting surface only)
Then prepare the wall mount bracket. Pull the wire(s)
and cable(s) for the system as below. Attach the wall
mount bracket to the mounting surface. (Hex Lag
#14
×
50)
②
Pull the wire(s) and cable(s) for the system as below.
Wire the cable(s) to the ports. Insert the mounting
hooks into the holes on the surface of the main body
and turn the main body. Assemble the main both with
the camera mount adaptor with the 3 screws. (Machine
M5
×
15)
③
Screw the dome cover to the main body and remove
the protection vinyl from the dome cover.
Important Notice
Before starting the installation, make sure that the Camera ID and Protocol are set up properly.