![background image](http://html1.mh-extra.com/html/bticino/391695/391695_instruction-manual_2825490023.webp)
23
2.4 Direct Installation on the Ceiling (391696 model)
①
To pass cables to upside of ceiling, please, make
about 50~60mm hole on the ceiling panel.
②
For cable connection, remove the pre-defined hole
mark on the Rubber Gasket and locate the summit of
the Plate Spring at the arrow mark as shown in the
dotted circle.
Rubber Gasket
③
After assembling the Rubber Gasket to the Terminal
Cover, install Terminal Cover on ceiling tex and
connect cables to terminal blocks.
④
Connect the “Drop Prevention Spring” to the main
body to prevent camera from drop.
⑤
Check the 2 mold line for assembly before starting
assembly. Line up the mold lines as shown in the
dotted circle and turn main body on its axis in
CW(Clock-Wise) direction and assemble main body
to Terminal Cover.
⑥
Tighten the Lockup Screw as shown bellow.