391695 / 391696 / 391715 / 391716 / 391717
36
3.5 Preset
Function
MAX. 127 positions are programmable. The Preset number can be assigned from 1
to 128 except 95. Preset 95 is reserved for entering into OSD menu. Camera
parameters such as White Balance, Auto Exposure and others can be set up
independently and each preset can have its own parameter values independently
from the other persets. When setting up presets with a controller, Label should be
blank and "Camera Adjust" should be set to "GLOBAL" as the default. To change the
parameters, enter into OSD menu.
Setting Presets
Set Preset [1~128]
Running Presets
Go Preset [1~128]
Deleting Presets
To delete Presets, enter into OSD menu.
3.6 Swing
Function
This function is that the camera moves repetitively between two preset positions at
programmed speeds. When a swing function runs, the camera moves from the preset
assigned as the 1st point to the preset assigned as the 2nd point in CW(Clockwise)
direction. Then the camera moves from the preset assigned as the 2nd point to the pres
assigned as the 1st point in CCW(Counterclockwise) direction.
1st Preset
2nd Preset
1
CW
Di
rec
tio
n
2
CC
W
Dir
ec
tio
n
In case that the preset assigned as the 1st point and the preset assigned as the 2nd
point are same, the camera turns on its axis by 360
°
in CW(Clockwise) direction and
then it turns back on its axis by 360
°
in CCW (Counterclockwise) direction. The Swing
speed is defined from 1
°
/sec to 180
°
/sec.
Setting Swings
To set Swing, enter into OSD menu.
Running Swings
Method 1) <Run Pattern> [Swing NO. + 10]
Method 2)
<Go Preset>
[Swing NO. +
140]
ex) Run Swing 3 : <Run Pattern> [13]
ex) Run
Swing
3 : <Go
Preset>
[143]
Deleting Swings
To delete Swings, enter into OSD menu.
