![background image](http://html1.mh-extra.com/html/bticino/391695/391695_instruction-manual_2825490059.webp)
59
4.10 Group
Setup
GROUP SETUP
------------------------
GROUP NO. 1
UNDEFINED
CLEAR GROUP CANCEL
RUN GROUP
<EDIT GROUP>
BACK
EXIT
Group Number
[1~8]
Selects a Group number to edit.
If the selected Group number is not defined, "UNDEFINED" will be displayed under the
selected Group number.
Clear Group
[CANCEL/OK]
Deletes the data of the selected Group.
Runs the Group for the test purposes to check if it works properly.
Run Group
Edit the selected Group.
Edit Group
Group Edit
EDIT GROUP 1
------------------------
NO ACTION ### DWELL OPT
------------------------
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
------------------------
SAVE
CANCEL [NEAR:EDIT]
EDIT GROUP 1
------------------------
NO ACTION ### DWELL OPT
------------------------
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
------------------------
SAVE [NEAR:EDIT ACT]
CANCEL [FAR :EDIT END]
1) Press
Near
key when the cursor is at “NO” to start editing the selected Group.
2) Note that MAX. 20 actions are allowed in a Group. Move the cursor up/down to select an Action. Press
Near
key to edit.