![background image](http://html1.mh-extra.com/html/bticino/391695/391695_instruction-manual_2825490012.webp)
391695 / 391696 / 391715 / 391716 / 391717
12
Main Part Description (391696 Model)
Dome Cover
Lockup Screw
Drop Prevention
Spring
Terminal Cover
Drop Prevention
Hook
Fuse
Cabling
Terminal Block
Main Body
Connector
Mounting Hole
Main Body / Terminal Cover
Terminal Cover
Dome Cover
Do not detach protection vinyl from dome cover before finishing all installation
process to protect dome cover from scratches or dust
This is used to install the camera directly on the ceiling or attach to the other
brackets such as in-ceiling, ceiling and wall mount. After separating this cover first
and then attach this directly to ceiling or to the other bracket. Camera must be
assembled at the last stage.
Terminal Cover
This part keeps the camera from dropping during installation and maintenance.
After install the Terminal Cover, please, hang the spring to the drop prevention
hook of main body as shown in picture for further tasks.
Drop Prevention Spring
Drop Prevention Hook
After assembling Terminal Cover to main body, screw Terminal Cover to main body
to protect them from separation by vibration and so on.
Lockup Screw
If the fuse is burnt to protect your came from over-current damage, the fuse have to
be replace with new one. The fuse specification is 250V 2A. However, we
recommend consulting with supplier to remove the cause of over-current.
Fuse
During installation, Power, Video, Communication, Alarm I/O cables are connected
on to this cabling terminal block.
Cabling Terminal Block