Bruker SamplePro hr-MAS Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 82

Bruker SamplePro hr-MAS Скачать руководство пользователя страница 7

7

Z31914_00_01

1

About

1.1

This Manual

This manual enables safe and efficient handling of the device.

This manual is an integral part of the device, and must be kept in close proximity to the
device where it is permanently accessible to personnel.

Before starting any work, personnel must have read the manual thoroughly and under-
stood its contents. Compliance with all specified safety instructions and operating
instructions is vital to ensure safe operation.

In addition, local accident prevention regulations and general safety instructions must be
observed for the operational area of the device.

Illustrations in this manual are intended to facilitate basic understanding, and may differ
from the actual design.

This user manual must be kept with the device. In addition to the user manual, instruc-
tions concerning labor protection laws, operator regulations tools and supplies must be
available and adhered to.

1.2

Policy Statement

It is the policy of Bruker to improve products as new techniques and components
become available. Bruker reserves the right to change specifications at any time.

Every effort has been made to avoid errors in text and figure presentation in this publica-
tion. In order to produce useful and appropriate documentation, we welcome your com-
ments on this publication. Support engineers are advised to regularly check with Bruker
for updated information.

Bruker is committed to providing customers with inventive, high quality products and ser-
vices that are environmentally sound.

1.3

Symbols and Conventions

Safety instructions in this manual are marked with symbols. The safety instructions are
introduced using indicative words which express the extent of the hazard.

In order to avoid accidents, personal injury or damage to property, always observe safety
instructions and proceed with care.

DANGER

This combination of symbol and signal word indicates an immediately hazardous sit-
uation which could result in death or serious injury unless avoided.

«
...
5
6
7
8
9
...
»

Содержание SamplePro hr-MAS



















































































Отзывы:

Нет отзывов