manualshive.com logo in svg

Bruker SamplePro hr-MAS, Руководство пользователя, Страница: 59 / 82

Поделиться
Скачать
Bruker SamplePro hr-MAS Скачать руководство пользователя страница 59

59

Z31914_00_01

11 Preventative Maintenance

11.1

Safety

Robotic System Preventative Maintenance

The SamplePro hr-MAS robotic system is designed with a minimum amount of mainte-
nance by the user. However, to preserve the accuracy and reliability of the instrument, 
the following Preventive Maintenance (PM) procedures must be performed on a regular 
basis according to the maintenance schedules given below.

Daily Preventive Maintenance

Daily PM is performed by the operator at the end of each day or after 8 hours of opera-
tion whatever comes first, and takes a few minutes.

WARNING

Electrical hazard from electrical shock

A life threatening shock may result when the door to the housing is open during oper-
ation.

f

Disconnect the device from the electrical power supply before opening the device 
for maintenance. Use a voltmeter to verify that the device is not under power!

f

Be sure that the power supply cannot be reconnected without notice.

f

The housing must be closed during operation.

f

Ensure that all warning labels are in place.

f

Only trained personnel should carry out maintenance.

NOTICE

Material damage hazard due to improper maintenance.

Device deadlock may occur as a result of failures due to a lack of proper mainte-
nance.

f

Maintenance intervals must be properly followed.

f

Use appropriate tools to avoid damaging parts or modules.

f

Only trained personnel should carry out maintenance work.

Содержание SamplePro hr-MAS



















































































Отзывы:

Нет отзывов