Bruker SamplePro hr-MAS Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 82

Bruker SamplePro hr-MAS Скачать руководство пользователя страница 11

11

Z31914_00_01

3

Safety

This section provides an overview of all the main safety aspects involved in ensuring
optimal personnel protection and safe and smooth operation.

Non-compliance with the action guidelines and safety instructions contained in this man-
ual may result in serious hazards.

3.1

Intended Use

The SamplePro hr-MAS sample changer has been designed and constructed solely for
the intended use described here.

The sample changer must only be used for keeping NMR samples in a specially
designed rotor container, inserting them into the NMR spectroscopy magnet and ejecting
them after measurement back into the rotor container.

Intended use also includes compliance with all specifications in this manual.

Any use which exceeds or differs from the intended use shall be considered improper
use.

No claims of any kind for damage will be entertained if such claims result from improper
use.

3.2

Owner‘s Responsibility

Owner

The term „owner“ refers to the person who themselves operates the unit for trade or
commercial purposes, or who surrenders the unit to a third party for use/application, and
who bears the legal product liability for protecting the user, the personnel or third parties
during the operation.

«
...
9
10
11
12
13
...
»

Содержание SamplePro hr-MAS



















































































Отзывы:

Нет отзывов