Bruker SamplePro hr-MAS Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 82

Bruker SamplePro hr-MAS Скачать руководство пользователя страница 36

36

Z31914_00_01

Transport, Packaging and Storage

6.3

Packaging

About Packaging

The individual packages are packaged in accordance with anticipated transport condi-
tions. Only environmentally friendly materials have been used in the packaging.

The packaging is intended to protect the individual components from transport damage,
corrosion and other damage prior to assembly or when returning the product to the man-
ufacturer. Therefore do not destroy the packaging and only remove the parts from the
packaging if instructed to do so by the Bruker Service Engineer.

Handling Packaging Materials

Dispose of packaging material in accordance with the relevant applicable legal require-
ments and local regulations.

6.4

Storage

Storage of the Packages

Store the packages under the following conditions:

•

Do not store outdoors.

•

Store in dry and dust-free conditions.

•

Do not expose to aggressive media.

•

Protect against direct sunlight.

•

Avoid mechanical shocks.

•

Storage temperature: 15 to 35 °C.

•

Relative humidity: max. 60%.

•

If stored for longer than 3 months, regularly check the general condition of all parts
and the packaging. If necessary, top-up or replace preservatives.

i

Under certain circumstances, storage instructions may be affixed to packages which
expand the requirements specified here. Comply with these accordingly.

«
...
34
35
36
37
38
...
»

Содержание SamplePro hr-MAS



















































































Отзывы:

Нет отзывов