Bruker SamplePro hr-MAS, Руководство пользователя, Страница: 60 / 82

60
Z31914_00_01
Preventative Maintenance
Weekly Preventive Maintenance
Weekly PM is performed by the operator at the end of the week, and takes only a few
minutes in addition to the daily maintenance.
Periodic Preventive Maintenance
The SamplePro hr-MAS has been developed to be maintenance free, there is no peri-
odic maintenance required. In the event problems should occur contact Bruker Service.
Maintenance Log
A log sheet should be used for verification of maintenance. Whenever preventive main-
tenance actions are performed the corresponding form should be completed.It is impor-
tant to maintain this record, as repairs necessitated by misuse; abuse or negligence is
not covered under the warranty or service contract.
11.1.1 Cleaning and Decontamination
Use a 70% ethanol solution and a lint free tissue (only) to clean and decontaminate the
instrument (e.g. deck, tips, deck trays, racks).
11.1.2 Weekly Maintenance
Weekly maintenance is performed by the operator once a week, in addition to the daily
maintenance.
1. Check the position of the first rotor position when inserting and ejecting a rotor.
2. Check the object sensor position when inserting and ejecting a rotor.
11.1.3 Cleaning and Lubrication
The following parts should be cleaned on a 6 monthly basis (more frequently if the unit is
in constant use).
11.1.3.1 Pickup Adapter and Object Sensor Z-racks
There is a risk of injury, infection and contamination from parts to be cleaned, which
could contain toxic and/or infected material. Appropriate protective clothing, gloves, and
glasses are required for this step!
Use a lint free tissue to clean the sensors. Move the Z-rack manually slowly up and
down several times to check for smooth movement.
• Never apply alcohol, alcohol solutions, or lubricant to the toothed rack or sleeve
bearings, as they may expand and block Z-movement.