Bruker SamplePro hr-MAS, Руководство пользователя, Страница: 18 / 82

18
Z31914_00_01
Safety
i
Note: Reference measurements should be made at regular intervals to help detect pos-
sible vibration and/or electromagnetic interference.
DANGER
Accident and/or material damage hazard from sample breakage.
Contact with hazardous substances contained in sample rotors that break may result
in a life threatening situation or material damage. The contents of the sample rotors
are the responsibility of the laboratory supervisor. The laboratory supervisor is
responsible for:
f
Defining disinfectant and cleaning procedures.
f
Establishing and enforcing the use of protective clothing (gloves, eye protection,
mask etc.).
f
Preparing laboratory instructions for handling this type of accident.
f
Preparing an emergency plan.
f
Enforcing standard sample handling procedures, e.g. removing all samples from
the rotor container and using sample rotors with dummy contents before mainte-
nance work etc.
f
Training laboratory personnel.
NOTICE
Material damage hazard from icing due to lack of nitrogen.
Material damage may result from icing caused by a lack of nitrogen flow.
f
The nitrogen fill level must be controlled regularly.
f
When icing occurs, the rotors must be defrosted according to established labora-
tory procedures.
NOTICE
Material damage hazard software error.
Samples or the unit may be damaged due to an software error causing malfunction of
the control system. Users may also be shocked by abrupt malfunction or unexpected
system start.
f
Sample rotors with dummy contents must be used during installation and service.
f
Personal should be alerted to unexpected malfunctions.