Bruker SamplePro hr-MAS Скачать руководство пользователя страница 69

Страница: 69 / 82

Z31914_00_01

Appendix A

A.1

Warning Signs

Caution

Accident hazard from breaking or spilled samples.

............................................... 17

Accident hazard from contact with hot or cold surfaces on the unit.

...................... 16

Danger to the environment from incorrect handling of pollutants!

......................... 19

Danger

Accident and/or material damage hazard from sample breakage.

........................ 18

Note

All panels and shields must be in place before operating this device!

................... 45

Only trained Bruker personnel are allowed to mount, retrofit, repair, adjust and dis-
mantle the unit!

...................................................................................................... 13

Reference measurements should be made at regular intervals to help detect possible
vibration and/or electromagnetic interference.

....................................................... 18

To avoid mix-up of the contents in rotors, proper standard laboratory operating pro-
cedures must be followed.

..................................................................................... 19

Notice

Material damage hazard due to improper maintenance.

................................. 17, 59

Material damage hazard from icing due to lack of nitrogen.

.................................. 18

Material damage hazard from overflow of cryogens.

............................................. 16

Material damage hazard software error.

................................................................ 18

Warning

Accident hazard from asphyxiation.

....................................................................... 16

Biological, chemical hazard.

.................................................................................. 17

Danger to life from incorrect installation and initial commissioning!

...................... 37

Electrical hazard from electrical shock

.................................................................. 59

Risk to life for unauthorized persons due to hazards in the working areas.

.......... 14

Severe hand injury.

................................................................................................ 41

Содержание SamplePro hr-MAS



















































































Результаты поиска

Содержание SamplePro hr-MAS

Отзывы:

Bruker SamplePro hr-MAS, Руководство пользователя, Страница: 69 / 82

Результаты поиска

Содержание SamplePro hr-MAS

Отзывы: