SET-UP
NOTE:
Connectors cannot be switched up.
sbl2008-002-555_a
Connect throttle cable to throttle lever as follow:
– Hook cable end barrel [2] to throttle lever
– Pull throttle cable sheath [1] and install throttle
cable adjustment screw [4] into its housing [3]
– Adjust as per procedure further in this bulletin.
Model(s): North American X and RXT-X
interational models
On North American X models, the handlebar is
already installed on watercraft but has been tilt
down for shipping.
A
sbl2008-002-004_a
Loosen the 8 bolts shown on picture enough to
move assembly freely.
Model(s): All X models
sbl2008-002-005
Align handlebar and X riser in order to be straight
with steering stem.
sbl2008-002-009_a
Make sure handlebar and stem is well centered in
the X riser [1].
NOTE:
D
Throttle cable
A
[2] must pass over
X riser.
Torque the 8 bolts first at 2 - 3 N•m (18 - 26 lbf•
in
),
then at 19 N•m (14 lbf•ft) into the following
sequence.
Predelivery
2008-1
15 / 29
