IMPORTANT NOTICE
IMPORTANT NOTICE
This bulletin must be used in conjunction with the
PRE-DELIVERY CHECK LIST
enclosed in the shrink pack.
WARNING
To obtain limited warranty coverage, pre-delivery procedures must be performed by an authorized
Sea-Doo watercraft dealer/distributor. Apply all necessary torques as indicated.
— The information and components/system descriptions contained in this document are correct at the
time of publication. However, BRP maintains a policy of continuous improvement of its products without
imposing upon itself any obligation to install them on products previously manufactured.
— Due to late changes, there might be some differences between the manufactured product and the
descriptions and/or specifications in this document. BRP reserves the right at any time to discontinue or
change specifications, designs, features, models or equipment without incurring obligation.
— The illustrations in this document show the typical construction of the different assemblies and
may not reproduce the full detail or exact shape of the parts; however, they represent parts that have
the same or similar function.
— The content of this bulletin is designed as a guideline only. All mechanics performing predelivery
procedures should have attended the current model year service training.
— Further information or inquiries should be directed to your distributor service representative and/or
specific
SHOP MANUAL
sections.
— Please complete the
PREDELIVERY CHECK LIST
for each watercraft and retain a purchaser signed copy.
— Make sure the purchaser receives the
OPERATORS GUIDE
,
PREDELIVERY CHECK LIST
signed copy
and
SAFETY VIDEO
.
WARNING
Torque wrench tightening specifications must be strictly adhered to. Where specified, install new
locking devices (e.g. lock tabs, elastic stop nuts). If the efficiency of a locking device is impaired,
it must be renewed.
Predelivery
2008-1
3 / 29
