SET-UP
sbl2008-002-003_a
Model(s): International only X models
sbl2008-002-007_a
Loosen 2 screws that secure housing.
Move housing toward end of handle about 13 MM
(1/2”).
sbl2008-002-008_a
Wrap padding on handlebar, secure it with
velcro™.
NOTE:
Tabs must be around handlebar [1].
Put back housing at is original location and retorque
bolts at 2 - 3 N•m (18 - 27 lbf•
in
).
Model(s): All X models
Install handle grip following same process as
others watercrafts described previously.
Throttle Cable
Model(s): International except X
1
F18F026
Insert end of throttle cable into plastic tube [1]
leading out from steering assembly.
16 / 29
2008-1
Predelivery
