FINAL PREPARATION
1
F18E0N6
With vehicle on a level surface, liquid should be
between MIN. and MAX. level marks [1] of coolant
reservoir when engine is cold.
NOTE:
Watercraft is leveled when it is in water.
When on a trailer, raise trailer tongue and block in
this position when bumper rail is leveled.
Add coolant to have level between marks as
required.
Use a funnel to avoid spillage.
Do not overfill.
NOTE:
Use recommended coolant type as
described in the Specifications table.
Properly reinstall and tighten filler cap then reinstall
seat.
Watercraft Identification
Model(s): All
To enter watercraft identification or to program
a safety lanyard, use BRP Utility and Diagnostic
Software (B.U.D.S.) in conjunction with VCK.
Always use the latest B.U.D.S. version
that is available from BOSSWeb
(www.bossweb.brp.com).
NOTE:
BUDS 2.3.17 version or higher is required.
1
2
F16R016
Connect VCK components and start B.U.D.S.
Choose KW2000 Protocol from Choose Protocol
option in the MPI drop-down menu [1].
Read ECM using leftmost icon [2].
Click on VEHICLE tab.
Enter purchaser name in the CUSTOMER field.
Click on second icon of toolbar Write ECM to
register new informations from MPI memory to
ECM.
Programming Keys With B.U.D.S.
Model(s): All
Refer to
SERVICE BULLETIN 2007-5
in regards to
the 3 different lanyard options available on ALL
4– Tec's.
Only 2 lanyards are shipped per watercraft. All
models to the exception of the GTI R are shipped
with Standard key and Learning key.The GTI R is
shipped with the Standard key and the R key.
sbl2007-001-01_a
Click on KEYS tab.
Predelivery
2008-1
21 / 29
