Brouwer Kesmac 4000 R Series, Руководство оператора

Страница: 53 / 161

Arm Calibration Screen.
NOTE
While in this screen the operator can move the Arm
Functions, Forks, and some of the Pallet Dispenser
Functions manually with the Cab 20-pad control.
(See page 3-14).
•
With the ‘ Position ’ Selected (selected item
highlighted with green underline) use the Right and
Left Arrow buttons to select the position to modify.
•
The ‘Up’ and ‘Down’ Arrows select which Position
or Co-ordinate to modify e.g. ‘
X ’
•
Button ‘1’. Loads the Arm’s actual position into
the new Co-ordinates.
•
Button ‘2’
.
Loads the Arm’s saved Co-ordinates
into the New Position.
•
Button ’3’. Moves the Arm to the New or Saved
Co-ordinates, whichever is last loaded
into the New Position.
•
Button ’4’. Saves the New Position value which-
ever was last loaded into New Position.
•
Button ‘5’. Enables the adjustment of the Maxi-
mum Arm Down Pressure Limit while
stacking on the current pallet config-
uration.
•
Button ‘6’. Opens the ‘Single Grip’ Pop-Up which
allows the operator to select when the
Arm picks up 4 or 5 rolls to be stacked
on the current pallet configuration.
•
Button ‘7’. Opens the ‘Squeeze’ Pop-Up which
allows the operator to select which
positions are to be ‘Squeezed’ on the
pallet.
•
Button ‘8’ . Enables the adjustment of the Maxi-
Mum Positions allowed on the current
pallet configuration.
Conveyors Screen.
•
Button ‘1’. Will send the machines components to
their Home/Ready positions and enter
its ‘Ready’ state.
•
Button ‘3’. Will manually ‘ Open ’ the Bad Roll Sec-
tion of the index Conveyor. Only avail-
when the System is ‘ OFF ’.(Auto Mode
’ OFF ’). Will ‘ Close ’ when machine
returns to ‘Ready’ state.
OPERATION
Arm Calibration Screen
Single Grip Menu Squeeze Menu
Conveyors Screen
3-15