Brouwer Kesmac 4000 R Series, Руководство оператора

Страница: 27 / 161

OPTIONAL CAMERA INSTALLATION
Piling Cavity and Gripper Head area.
Fig.1
Place the Camera Mounting Bracket ‘ A ’ on the beam,
positioned to the operator’s preference.
Mark the location of two holes ‘
B ’.
Drill and tap the two holes to 10-32.
Fig.1
Fig.2
Put Blue Loctite on the threads and screw the two
Stand-offs into place.
Attach Camera to the Stand-Offs.(fasteners in kit).
Feed the camera cable down to the removable panel
at the lower right side of the cab. (See Fig.3).
Fig.2
Fig.3
Remove the lower rear panel and drill a 13/16in. hole
in the
center of the panel. Feed the camera cable
through the panel into the cab.
Put silicone sealant on the cable grommet and fit it
into the panel. Refit the panel.
Fig.3
SAFETY
Fig.4
Remove the two bolts ’ C ’ attaching the Cup-holder.
Pull the Closing Panel ‘D’ forward to remove it.
Remove Finishing Piece ‘E’, ( held in place with
Velcro).
Fig.4
Fig.5
Pull the Cable up from the lower panel, ( See Fig 3),
sufficient to connect it to the plug ‘
F ’ in the harness,
labeled ‘CAMERA 2’
Pug labeled ‘ CAMERA 1’ is for the standard back-up
camera.
.
Fig.5
Replace the closing panel and finishing piece.
Re-attach the Cup-holder.
1-17