Brouwer Kesmac 4000 R Series, Руководство оператора

Страница: 50 / 161

OPERATION
Auto Drive System.
Two advantages to using this feature are:
•
Machine will return to last Saved/Set Harvest Ground Speed.
•
Machine will maintain Saved/Set Harvest Ground Speed
which would normally vary on grades in the field.
To Set/Save/Change Auto Drive Ground Speed:
•
While in harvest (System ON/Auto Mode), at the desired
ground speed, press and Hold Pad ‘ 8 ’,(on 8-pad control).
The system will save the current ground speed and turn
the Auto Drive ‘
ON ’. (Indicated on Display).
•
To increase speed ,with Auto Drive ‘ ON ’ press Pad ‘ 6 ’.
•
To decrease speed press Pad ‘ 5 ’. After changing speed
the system will save the new Auto Drive speed setting.
•
To turn the Auto Drive ‘ OFF ’, pull the Control Handle ‘ A ’
‘ BACK ’, or press Pad ‘8’ .
•
To resume to the last Saved/Set speed, move the Control
Handle to approximately the same speed and press Pad ‘8’ .
If Auto Drive has not turned on automatically it will now
be ‘
ON ’.
•
Auto Drive will remain enabled but will not maintain
ground speed if the
RPM Control ‘ C ’ is not at 100%, or if
the Foot Pedal ‘ B ’ is pressed.
Control Console.
Operation and Harvesting Modes(per Screen).
Harvest Main Screen.
•
Button ‘ 1 ’ will send the machine main components to
their Home/Ready positions and enter its ‘ READY ’ state.
•
Button ‘ 2 ’ opens ‘ Select Screen’ Pop-Up Menu - to
navigate to required screens.
•
Button ‘ 3 ’ opens ‘ Stacking Items’ Pop-Up Menu to
adjust the following actions :
Empty Pallet: Pressing and holding the ‘ OK ’ Button will
reset the positions on the pallet to ‘ 0 ’.
Roll Compression: Adjusting from ‘ 0 ’ to 100% - determines
how much the Arm compresses the rolls
on the pallet , per layer, while stacking.
Harvest Main Screen
Increasing from 0 % (1
st
layer) to
setting % (last layer), incrementally.
Index Count: Adjustment of Rolls on Index Conveyor.
Position Count: Adjustment of Positions on Pallet.
Reset Pallet Counter: Press and Hold the ‘ OK ’ Button to reset
the current Pallet Count on the Display.
•
Button ‘ 4 ’ – Press and hold to insert a Pallet onto the forks.
NOTE
Machine has to be in ‘ READY ’ State with Positions on
Pallet at ‘ 0 ’ (empty). Button 3.
•
Button ‘ 5 ’ - only enabled when the Arm is at ‘ Home ’ position Button 2. ,
above Index Conveyor with the System ‘ ON ’ (Auto Mode).
Pressing and Holding Button ‘ 5 ’ completes the Pallet to
its maximum positions and is considered ‘ FULL ’.
3-12 cont….