Brouwer Kesmac 4000 R Series, Руководство оператора

Страница: 121 / 161

ADJUSTMENTS
Depth of Cut.
A Depth of Cut indicator is fitted on the depth cylinder.
This gives the operator a quick visual indication of the
depth of cut setting ,and if turf conditions change, to make the
necessary adjustment.
Remove Arm Drive Belt.
Front Clamp.
•
To slacken the belt, back-off the Locknut ‘ A ’ and also
the adjuster nut inside the Arm Housing.
•
Loosen the Socket Hd. Bolts ‘ B ’.
•
Remove the Socket Hd. Bolts ‘ C ’ and slide the belt
•
sideways ‘ D ’ out of the Clamp.
•
Pull the loose end of the belt off the drive motor and
through the Arm Mount.
Rear Clamp
•
Loosen the Socket Hd. Bolts ‘ E ’.
•
Remove the Socket Hd. Bolts ‘ F ’ and slide the Belt
sideways ‘ G ’out of the Clamp.
Install a new belt in the reverse order.
IMPORTANT
To ensure that the drive belt is tensioned correctly the
following procedure must be carried out.
It is important that the belt is not set too tight as this
will result in premature belt failure.
Checking Arm Drive Belt Tension.
Using a suitable tension gauge :
•
Attach a strap around the Drive Belt.
•
Hook the gauge in the strap and pull upwards.
•
The gauge reading should reach 25lbs. before the
belt shows
any deflection.
If available a compression gauge can also be used.
6-11