Brouwer Kesmac 4000 R Series, Руководство оператора

Страница: 13 / 161

General Operating Safety
•
Ensure all persons are clear of the machine before
starting the engine. Keep hands and feet clear of
the cutting unit and all moving parts.
•
Do not make sharp turns. Exercise care when
reversing and maneuvering. Look behind the
machine and downward when reversing.
•
Keep all persons clear of the Robotic Arm
operating areas and pallet cavity, the Arm may
move suddenly and result in serious injury.
•
Exercise caution when approaching or crossing
roadways.
WARNING
Never attempt to get on or off the machine
when it is moving.
Before leaving the operating position, place
the Control Handle in ‘neutral’, set the brake,
lower the cutting head and pallet forks to
the ground, stop the engine and remove the
ignition key.
Starting the Engine.
WARNING
Start only in accordance with the instructions
in this manual
•
Start only from the operator’s seat, with System
Power ‘
OFF ’, the Control Handle in ‘ NEUTRAL’
and brake ‘ ON ’.
•
DO NOT use starting-aid fluid.
Transporting
•
Exercise caution when loading or unloading the
machine on or off a truck or trailer.
IMPORTANT
If the Conveyor is to be removed when trans-
porting the machine refer to page 1-09 for the
correct procedure.
•
Ensure that the machine is properly ‘blocked’ and
secured during transport.
SAFETY
Operating
•
Do not change the engine governor setting,
or over-speed the engine.
WARNING
Work in a ventilated area. Never operate the
machine without adequate engine exhaust
ventilation.
Never run the engine in an enclosed area.
Exhaust fumes contain carbon monoxide and
can be fatal if inhaled.
•
Inspect the area to harvested and remove any
objects that may be hazardous or may cause an
injury.
•
Operate with adequate light and avoid any holes
and other hazards.
Highway Operation
•
Ensure that the ‘Slow moving vehicle’ sign is in
place.
•
To prevent collisions with other vehicles, slow
moving tractors with attachments, towed equip-
ment or self-propelled machines, frequently check
for traffic from the rear, particularly when making
turns. Always use the turn signal lights.
•
Slow down and exercise caution when making
turns and when crossing roads and railway tracks.
•
Use headlights, flashing warning lights and turn
signals day and night. Follow local regulations
for equipment lighting and marking.
Ensure that all lighting, signals and markings are
visible, clean and in good working order.
Repair or replace any lights, signals or marking
that is damaged or is missing.
To prevent Tipping
•
Avoid holes, ditches, slopes, and obstacles that
may cause instability and the machine to tip.
WARNING
Never drive close to the edge of a gully or steep
embankment that may collapse and cave-in,
causing the machine to tip.
1-03