ADVANCED EMBROIDERY
135
3
Disabling the Link function
a
Touch ,
then .
The general settings screen appears.
b
Locate [Link].
c
Touch [OFF] to disable the Link function.
When the message to finish the Link mode appears,
touch .
d
Turn off the machine.
Embroidering split (large-size) patterns
Split (large-size) patterns created with PE-DESIGN version 7 or
later can be embroidered. With large-size patterns,
embroidery designs larger than the embroidery hoop are
divided into multiple sections, which combine to create a
single pattern after each section is embroidered.
For details on creating large-size embroidery patterns and for
more detailed embroidering instructions, refer to the manual
included with PE-DESIGN version 7 or later.
The following procedure describes how to read the large-size
embroidery pattern shown below from USB media and
embroider it.
a
Connect to the machine the media containing the
created large-size embroidery pattern, and then select
the large-size embroidery pattern to be embroidered.
*
For details on retrieving patterns, refer to page 130.
A screen appears so that a section of the large-size
embroidery pattern can be selected.
Note
• When you turn off the machine, wait for about 5
seconds before turning on the machine again.
EMBROIDERY APPLICATIONS
