Brother MFC-5200C, Руководство по обслуживанию

Страница: 25 / 294

3-1
3.1 CONDITIONS REQUIRED FOR INSTALLATION
Any machine is likely to be influenced by the environment of the set-up location. If the machine is
set-up in an inappropriate location, the machine may not perform as expected. Therefore, the
following factors should be taken into consideration before deciding where to set-up the machine.
3.1.1 Environmental Conditions
The machine should not be set up in the locations referred to in the following items (a) through (d)
which specify inappropriate locations for set-up.
(a) Where it is likely to receive direct sunlight or similar light. (For example, next to a window)
(b) Where it is likely to suffer a big difference in temperature and humidity between the
maximum and minimum levels. (Normal operation environment is within 10 ˚C to 35 ˚C, 20 to
80%RH and without any condensation.)
(c) Where it is likely to be in a draft of cold air from an air-conditioner or warm air from a heater,
or to receive direct radiant heat.
(d) Where it is likely to be excessively dusty or be subject to corrosive gases such as ammonia.
(e) Users should select a location with good ventilation and set the machine on a flat surface.
(f) Users should check that the maximum angle of the set-up location is horizontal to within 1 ˚ .
3.1.2 Basic Layout of machine Set-up Location
Shows the basic layout of the machine set-up location that is suitable for smooth.